IV-18 VFD Clock Tube Clock Instructions

Attention:

As shown in Picture1, press the packaging with one hand and slowly pull out the base corner with the other hand; It is strictly prohibited to pull the glass tube directly, as it is fragile and can easily scratch fingers. After taking out the light clock, put it on the table as shown in Picture2, Gently press the plug plates on both sides with both index fingers to ensure that it is fully inserted, and then power it on

Button Control Instructions;

1: Setup key: Press this key to enter the time setting mode and set the hours, minutes, seconds, month,
and day separately. The set number will flash when setting the current data. Numbers can be adjusted
by + and - keys. (In the setting mode, if there is no operation in 15S, it will back to the clock display mode)
2: Set+:In setting mode, press the key and the number increases..
3: Set-: In setting mode, press the key and the number decreases.
4: On/off: Press the key to turn off/on the light clock.
5: Temperature display:
Press this key, it will display the current ambient temperature; Press again to switch Celsius/Fahrenheit,
It will back to the clock display mode automatically after 5S.
6: Clock display: Short press this key, switch Mode 1/Mode 2 (Mode 1: Showing “hour-minute-second” all the time. Mode 2: Time/Date cycle display. (In this mode, displays "hour-minute-second" for 5 seconds, and
then switch to display "month-day" for 3 seconds)
              Long Press this key, switch 12/24 hour
7: Light mode: short press the key to switch below backlight mode.
Rainbow mode; breathing light mode; monochrome mode; theater mode; off mode.